Lec TL5510W, User Manual

Page: 13 / 16

For: The doors on the TL5510W
Reversing the door
th e
1.
Undo the screws and remove the hinge bracket from the base.
A spanner may be required to loosen the bolts first. 1
.
2.
Remove the screws and adjustable foot from the opposite side
and fit back to where the hinge bracket was located.
2
.
3
.
Slide the door down and off the top hinge pin and
lift away from the appliance
.
4
.
Remove the hinge bush at the top of the doorand swap it with the
blanking plate on the otherside. Repeat with the hinge bush
and blanking plate on the bottom of the door.
5
.
Using a screw driver, remove the pin from the top bracket.
Replace it on the opposite bracket. Ensure the pin is secure
6
.
Slide the door on to the top hinge, ensuring it is all the
way up.
Screw the bottom hinge into place on the new side
and replace the adjustable feet
7
.
Check that door is aligned horizontally and vertically and
that the seals are closed on allsides before finallytightening
the bottom hingle.Re-adjust
the levelling
7
Changing The Bulb