20
Maintenance and Cleaning
Changing the plug
This appliance comes fitted with a 13Amp plug fitted.
Should you need to replace the fuse. A BS 1362 13 Amp
fuse must be used. Should the plug itself need to be
replaced, the wires in the mains lead are coloured in
accordance with the following code:
Green and yellow = Earth
Blue = Neutral
Brown = Live
The wire coloured green and yellow must be connected to
terminal marked with the letter E, coloured green and yellow
or marked with the earth symbol:
The wire coloured blue must be connected to the terminal
marked with the letter N, or coloured black.
The wire coloured brown must be connected to the terminal
marked with the letter L or coloured red.
Upon completion, there must be no cut or stray wire present
and the cord clamp must be secure over the outer sheath.
Changing the light bulb
Before replacing the light bulb, switch off the electricity
supply to the appliance.
To remove the bulb cover, press the rear of the cover in (1)
and slide the cover toward you (away from the interior
wall)(2).
Replace the bulb with a new E14 Max 15W bulb.
Replace the plastic cover and reconnect the electricity
supply.
Bulbs are not covered by any warranty, but can be
purchased at your local hardware store. Remember to take
the old bulb with you if you are unsure of what kind of bulb
to buy.
