SECTION 3 : INSTALLATION
Moving Your Table
•
To avoid damage to your Pro Salon™ table, it is very important that it only be lift ed from
certain positi ons on the table (marked with
BLUE
circles below)
•
You may need to plug in your table and raise the table, the back secti on, and/or the leg
secti on for easier access to the base for lift ing purposes.
•
Lift your table by grasping fi rmly from the bott om of the frame. Do not try to lift from
the fi ns on the Cuvee cabinet or the cabinet doors.
Your Pro Salon™ table comes completely assembled and ready to use.
Ensure you read and follow the unpacking instructi ons included with your shipment.
If you did not receive unpacking instructi ons, please contact LEC customer service before
unpacking your table.
Once the table is unpacked, follow the “Moving Your Table” instructi ons below.
Basic Setup Instructions
Once your Pro Salon™ table is positi oned for use, follow these steps:
•
Plug the power cord into a grounded outlet that is properly rated for the table.
•
Arrange and secure the power cord so it will not create a tripping hazard.
•
Place the hand and foot controls in locati ons where they are safe and accessible.
•
Ensure the controls are not in danger of being crushed by the lift or ti lt mechanisms.
•
Follow the “Leveling Your Table” instructi ons on the next page.
6
Your table is very heavy - extreme cauti on should be used to avoid injury
to yourself, others around you, and your table. DO NOT lift or move
without using proper safety procedures/equipment. DO NOT turn the
table on its side for any reason.
Weight & Lift Capacities
The Pro Salon™ is powered by a heavy-duty Quietech hydraulic
lift actuators. The recommended lift capacity for the Pro Salon
Collecti on tables is 650 lbs.
650 lbs.
The back secti on and leg secti on has a maximum weight capacity
of 100 lbs. These secti ons are not meant to hold full body weight.
100 lbs.
