Lec L6014W/S User Manual Download Page 6

 

Installation 

Door Reverse 

Warning: 

Remove the main plug before 

reversing the door.  2 people may be required to 

reverse the door. 

1.  Remove the screws (6) holding the top panel 

(7) to the unit. Remove the top panel. 

2.  Remove the two screws (1) holding the top 

hinge (5) (right side) to the frame. Remove 

the top hinge (5). 

3.  Lift the door off the bottom hinge pin and 

place it on a non-scratching surface. 

4.  Remove the two screws (8) holding the 

bottom hinge (2). Remove the bottom hinge 

(2). 

5.  Remove the left front 

feet

 (4) and transfer it to 

the right side. 

6.  Before replacing the bottom hinge (2), 

remove the hinge pin (9) and reverse the 

direction of the hinge (2). Reassemble the 

bottom hinge (2) on the left hand side using 

the two screws (8). 

7.  Refit the hinge pin (9) into the bottom hinge 

(2). 

8.  Lower the door onto the bottom hinge pin (9). 

9.  While holding the door in the closed position, 

reassemble the upper hinge (5) on the left 

hand side using the two screws (1). Do not 

tighten the screws (1) until the top of the 

upper door is level with the counter top. 

10. Refit the top panel (7) using the screws (6) 

 

 

 

Summary of Contents for L6014W/S














Reviews: