Page | 16
Access Ports
A 16mm access port is fitted to the left hand side of the appliance. This can be used to feed your own
monitoring probes inside the storage chamber. If you do not intend to use the port then leave the pre-
fitted caps and foam insert in place.
If you intend to use the access port, remove the plastic caps and the foam insert from the access port
hole. Slide the replacement plastic cap with a hole in over your probe as shown in photo 4A. Place the
cable of the probe in the slit in the foam insert as shown is photo 4B. Slide the foam insert into the
access port hole and push the plastic cap into place as shown in 4C.
Photo 4A Photo 4B Photo 4C
NEVER leave the access port open as warm air and moisture will be drawn into the
refrigerator, which will affect performance.