Reversing the door
For the doors on the LC SRS149W
Warning: Remove the main plug before
reversing the door. 2 people may be required
to reverse the door.
1. 1. Remove the screws (6) holding the
top panel (7) to the unit. Remove the top
panel.
2. Remove the two screws (1) holding the
top hinge (5) (right side) to the frame.
Remove the top hinge (5).
3. Lift the door off the bottom hinge pin and
place it on a non-scratching surface.
4. Remove the two screws (8) holding the
bottom hinge (2). Remove the bottom
hinge (2).
5. Remove the left front feet (4) and
transfer it to the right side.
6. Before replacing the bottom hinge (2),
remove the hinge pin (9) and reverse the
direction of the hinge (2). Reassemble the
bottom hinge (2) on the left hand side
using the two screws (8).
7. Refit the hinge pin (9) into the bottom
hinge (2).
8. Lower the door onto the bottom hinge pin
(9).
9. While holding the door in the closed
position, reassemble the upper hinge
(5) on the left hand side using the two
screws (1). Do not tighten the screws (1)
until the top of the upper door is level
with the counter top.
10. Refit the top panel (7) using the screws
(6)
REVERSING THE DOOR