7
WARNING
Always ensure the mains have been turned off when connecting
the wiring to the hob or when disconnecting the wiring from the
hob
Before connecting, check that the nominal voltage of the appliance,
which is the voltage stated on the rating label (shown in Fig. 3
below), corresponds to the available supply voltage. The rating label
is located on the bottom of the hob.
The hob is to be connected to the mains using the “terminal block”
that allows the appliance to be disconnected from the mains at all
poles.
The connection must be carried out as per the diagram in Fig. 3.
50 mm
760 mm
130 mm
Fig. 2
Electrical Connection