2Oz). Then close the pump and wait for 5s.
6. Press down the coffee/steam button “
”
to the lower position, wait until the yellow
indicator light is illuminated. Make steam for 2 min, then turn the steam knob to the "O"
position to stop making steam. Press the ON/OFF button “
”
to turn off the unit immediately,
leave the descalers deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then press and release the coffee/steam button “
”
to the high setting, when the green
lamp is illuminated, press down the pump control button “
”
to the lower setting to brew
until no descaler is left.
9. Then brew coffee (no coffee powder) with tap water in the MAX level, repeat the steps of
4-6 for 3 times (it is not necessary to wait 15 minutes in step of 6), then brew until no water
is left in the tank.
10. Repeat steps 1 to 9 at least 3 times to make sure the piping is clean.
TROUBLE SHOOTING
Symptom
Cause
Corrections
Water leaks from the bottom
of coffee maker.
There is too much water in
the drip tray.
Please clean the drip tray.
The coffee maker has
malfunctioned.
Please contact Pensonic
Customer Care Centre.
Water leaks out of filter sides. There is some coffee
powder on filter edge.
Clean it.
Acid (vinegar) taste present in
Espresso coffee.
Not cleaned properly after
cleaning mineral deposits.
Refer
to
section
“
CLEANING MINERAL
DEPOSITS
” to clean coffee
machine.
The coffee powder is stored
in a hot, wet place for a
long time. The coffee
powder has spoilt.
Please use fresh coffee
powder, or store unused
coffee powder in a cool, dry
place. After opening a
package of coffee powder,
reseal it tightly and store it
in a refrigerator to maintain
its freshness.
The coffee machine doesn’t
The power outlet is not
Plug the power cord into a
