PERSONAL PROGRAM SET
The
Right Timer
™ has a feature that allows you to set and save your own personal programmed
amount of time. This is very convenient for setting a standard time for a reoccurring task or test.
Once you set and save a setting for this feature, you will see this amount of time displayed every
time you enter the
TIMER
mode. Then all you have to do is press the
START
key to begin timing!
1. To your save your personal time, press the
MODE
button until
TIMER
mode is selected.
2. Press and hold the
PROG
button for three (3) seconds. The word
TIMER
will begin flashing on
the screen.
3. Use the arrow buttons to enter the desired amount of time beginning with the "seconds" section.
Press the
SET
button to lock in your entry. Repeat these steps with the minute and hour
sections.
4. If the amount of time you wish to enter is in whole minutes (no hours or seconds) you can use
the
QUICK SET
buttons to enter the total amount and press the SET button three (3) times to
lock in the entry.
5. Once you have saved your own setting, this will become the default time each time you enter
the
TIMER
mode. You can change this amount at any time by repeating the steps above.
6. Press the
START
button once to activate the timer when the timer mode is displayed on screen.
The screen will show
TIMER COUNT UP
or
TIMER COUNT DOWN
to indicate the direction of
the count!
When the timer is in
COUNT UP
mode, the bars on the graphic display will fill in as time passes.
When the timer is in
COUNT DOWN
mode, the bars will disappear as time passes.
Press the
REV
button to change the direction of the count. So your unit can count either up or
down. The choice is yours!
PAUSING THE TIMER
Press the
FREEZE
button to pause in mid-count. The display will flash "
!
", indicating the pause.
8
9
QUICK SET FOR WHOLE MINUTES
1. Press the
MODE
button until
TIMER
is showing on the display.
2. Press and hold the
SET
button for three (3) seconds to enter the programming mode. The
TIMER
mode will flash on the screen indicating that you can program your time.
3. Use the
1
,
5
and
10
minute buttons to "quick set" your time. For example, if you want to set
for 38 minutes, you would:
–press the
10
button three times (the screen shows 30 min)
–press the
5
button once (the screen shows 35 min)
– the
1
button three times (the screen now has total of 38 minutes).
4. Press the
SET
button three (3) times to accept and lock in your entry.
5. Press the
START
button to begin timing!
Press the
REV
button to change the direction of the count. So your unit can count
either up or down. The choice is yours!
SETTING TIMER USING SECONDS, MINUTES and HOURS
The procedure for setting the
TIMER
begins with
SECONDS
, then
MINUTES
, then
HOURS
.
1. To enter the timer mode from any other mode, press the
MODE
button until
TIMER
is shown
on the display screen.
2. Press and hold the
SET
button for three (3) seconds to enter the programming mode. The
word
TIMER
and the "seconds" will begin flashing, indicating you are now in the programming
mode. The first time you set the timer, the screen will show 30 minutes. This is the default
setting. Once you set your own personal setting for the
PROG
button (see Personal Program
Setting), that number will become the default time.
SETTING THE TIMER (SECONDS)
1. The display will flash the
TIMER
indicator. The display will now flash "seconds". As before,
press and hold either arrow button to advance to the "seconds" of time you want. Remember
that holding down an arrow button will advance the numbers more quickly!
2. Press the
SET
key to accept and confirm the seconds.
SETTING THE TIMER (MINUTES)
1. After setting the hours, the display will now flash "minutes". As before, press and hold either
arrow button to advance to the "minute" of time you want. Remember that holding down an
arrow button will advance the numbers more quickly!
2. Press the
SET
button to accept and confirm the minute.
SETTING THE TIMER (HOURS)
1. The "hours" place will begin flashing. Press and hold either arrow button to advance to the
"hour" of time you want. Holding down an arrow button will advance the numbers more quickly!
2. Press
the
SET
button to accept and confirm the hour.
BARS DISAPPEAR
BARS APPEAR
FLASHES WHEN
TIME IS PAUSED
6955 GUD V2 3/19/07 9:47 AM Page 5
