Solder
in
g Ir
on
GOOD
OKAY
A little metal mountain
resembling a hershey kiss.
Fully covered solder pad, you
should see no more gold.
The solder is not fully on the
solder pad. You still see some
gold visible. Give it a another
try. Just reheat the solder joint
and add a little more solder.
A blobby solder joint that is
more spherical. You can use
less solder next time. The
electronics should still work!
BAD
04.
Step-By-Step
Assembly Instructions
Start with the first resistor. This resistor
is going to go into the place on the
board labeled R1. Resistors are
bi-directional meaning it doesn't
matter which way they're rotated when
you put them in. First remove the tape
on both ends of the resistor leads. Then,
bend the legs of the resistor and slide it
into its home on the printed circuit
board. Once the resistor is in place it
helps to bend them slightly outwards
so the part doesn’t fall out.
1.
STEP 1: RESISTORS
110
V
60W
Solder
in
g Ir
on
Summary of Contents for Hue
Page 1: ...Hue ...
