4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
Off
.
2. Find the battery cover located on the back of the unit, use
a coin or screwdriver to loosen the screw and then open the
battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 3 new AA (AM-3/LR6) batteries following the diagram
inside the battery cover. (The use of new alkaline batteries
is recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
613900 manual rev.indd 4
613900 manual rev.indd 4
02/23/2021 11:57:40
02/23/2021 11:57:40
