Environmental Phenomena
Static electricity may cause the unit to malfunction. In cases
where unit is malfunctioning due to static electricity, reset the
unit by turning the power Off and back On again.
Disclaimer and Limitation of Liability
LeapFrog and its suppliers assume no responsibility for any
damage or loss resulting from the use of this handbook. LeapFrog
and its suppliers assume no responsibility for any loss or claims
by third parties that may arise through the use of this product.
TROUBLESHOOTING
If for some reason the heaphones do not work, please follow
these steps:
Problem
Correction
The
LeapPods
Max™
has
stopped working
1. Slide the
On/Off Switch
to the Off
position for 30 seconds.
2. Slide the
On/Off Switch
to the On
position again. It should now work
properly.
3. If the headphones don’t work,
recharge the battery and repeat steps
1 and 2.
(Refer to the Getting Started section
for details.)
Cannot connect
with
3.5mm
Audio Cable
1. Make sure the headphones are
powered on.
2. Check that the
3.5mm Audio Cable
is
connected to your headphones and
the external device correctly.
3. Inspect the
3.5mm Audio Cable
for
damage.
12