3
GETTING STARTED
INITIAL SETUP
For your child’s safety, the following steps must be assembled by an adult.
1. Plug the USB B Connector end of the
Micro USB
Power Cable
into the USB B port on the
HDMI
Game Stick
.
2. Plug the
HDMI Game Stick
into an HDMI port on
your television.
3. Plug the USB A Connector end of the
Micro USB
Power Cable
into a USB port on your television
or other qualified DC 5V adapter with output no
less than 500mA.
Note: If the
HDMI Extender Cable
is needed, plug the
HDMI Game Stick
into the
HDMI Extender Cable
. Plug the
HDMI Extender Cable
into an HDMI port on your television.
BATTERY REMOVAL AND INSTALLATION
1. Find the battery cover located on the back of the
Wireless Controller
, use a coin or screwdriver to
loosen the screw and then open the battery cover.
2. Remove old batteries by pulling up on one end
of each battery.
3. Install 2 new AA (AM-3/LR6) batteries following
the diagram inside the battery box.
4. Replace the battery cover and tighten the screw
to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
