5
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned
Off
.
2. Find the battery cover located on the bottom of the unit,
use a screwdriver or coin to loosen the screw, and then
open the battery cover.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended.)
5. Replace the battery cover and tighten the screw to
secure.