4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on
the back of the unit, use a
screwdriver to loosen the screw
and open the battery box.
3. Remove old batteries by pulling
up on one end of each battery.
4. Install 2 new AA (AM-3/LR6)
batteries following the diagram
inside the battery box. (The use
of new alkaline batteries is recommended for maximum
performance.)
5. Replace the battery cover and tighten the screw to secure.
Note:
If the unit repeatedly powers down while playing, please install
a new set of batteries.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc), or rechargeable (Ni-Cd, Ni-MH), or new and
used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
