WARNING!
IMPORTANT NOTICE ABOUT YOUR LEANDER TABLE
This may be your first experience with a motorized treatment table. You may experience slight audible
noises from the table drive system. This is not unusual as the drive system is powered by a 1/3
horsepower motor and 60/1 ratio gear box. As the table caudal section moves and changes direction
from downward to upward, there is a significant weight shift which may cause the gear box to “knock”
at the top and bottom of the stroke. This is normal and is not cause for alarm. Also, a slight “whirling”
sound may be heard which is caused by the motor driving the gear assembly. This is also normal and
may change in frequency and tone from the varying weight of small to larger patients. Remember,
just like your refrigerator, dishwasher or car, all run by a motor drive system that makes noise (even
a Lexus does!) Our Leander table drive system will make audible sound. Also, hard floors without
ample covering tend to amplify even a slight noise.
The above drawing shows the Lumbar Table with the uplift (Variable Height Option) in its uppermost
position and the caudal (pelvic) section in its lowest position (and at the lowest position of cam stroke)
DO
NOT
put the table in this position at any time while running the motor.
The table is not designed
to use these to extreme flexion mode.
It is recommended that if you wish to increase the amount of flexion that you raise the center tube
(uplift-variable height) 2-3 inches with the caudal (pelvic) cushion left in its lowest position. The table
may be energized in conjunction with the center tube (uplift-variable height) when raised to its
uppermost position and the caudal (pelvic) section raised to its uppermost position. It is further
recommended that the caudal (pelvic) section never be lowered more that 50% of the distance that
the center tube (uplift-variable height) is raised when the table is being operated in motorized
flexion/distraction.
If you have any questions regarding this or other operating features of your Leander Table, please call
one of our courteous service or sales staff and we will assist you. Thank you and we hope you and
your patients enjoy your Leander Multi-Purpose Adjusting Table.
FOR SERVICE & SUPPLIES CALL:
Chiroform A/S
Mariendalsvej 22
DK-8800 Viborg
Tel. +45 8661 3611
www.chiroform.com
