Lean Cars CH9935 Installation And Operating Manual Download Page 4

Instruction

The car handles

 Wheel

Instruction

Install Step

14.When the car can't run because of battery exhaust, pull out the 
handle bar under the car, and take out the small wheel, which 

easy to carry out.(PIC 2)(

Warning

: Don't put on the kid on car 

during carry)

10

12

11

1

2

11. Put on the seat back as arrow, click it on positon by hand 
(PIC 11) 

12. Put on the seat as arrow show, make sure the two hook in 
the back into slot in advance, then tighten the seat by screw 
(PIC 12)

10. Connect the battery wire and gear box wire as show
(PIC 10)

Police light/Police alarm
 switch (Selection)

speaker (Selection)

switch

H/L Switch
(Selection)

recharger

Music alarm button

on/off switch

F/R switch

Radio (Selection)

Pedal switch

13.Batter recharger:(PIC1)
Please recharge the battery when it's exhaust. Recharger socket 
is under seat.(Note:The car doesn't work during recharger. Battery 
recharger should be done under adult supervision).Recharer 
battery should  be taken out from toy. Press the speaker button, 
(This function is selection). Press on/off to control power,operate 
pedal switch to control car move forward & revise.

Battery wire (white)

Gearbox wire (Red)

(Selection)

Swing switch

3*10Pommel
 Screw

4*14Umbrella 
Head Screw

Summary of Contents for CH9935







Reviews: