1. OPERATING INSTRUCTIONS
1.1: Turning water on/off from the Wireless On/Off Switch
Turning the water OFF
Press the OFF switch. The blue LED indicator on the switch will
flash and beep, the Water Valve Control will beep twice to confirm
a wireless signal has been received, and the wireless switch will
flash red and beep twice to confirm that the command has been
acknowledged. The valve will close.
To turn the water ON
Press the ON switch. The blue LED indicator on the switch will
flash and beep, the Water Valve Control will beep once to confirm
a wireless signal has been received, and the wireless switch will
flash green and beep once to confirm that the command has been
acknowledged. The valve will open.
1.3: Turning water on/off from the Water
Valve Control
Turn the water off by pressing the
“WATER OFF”
button on the Water Valve Control it will beep twice.
The valve will close.
Turn the water on by pressing the
“WATER ON”
button on the Water Valve Control. You will hear
1 beep and the valve will open.
1.4: Operating Instructions Water Flow Meter (if installed) – Continuous Flow or No Flow
Once set, the Continuous Flow and No Flow program is automatic.
Continuous Flow: If water flows continuously for more than the programmed time, the system will assume there is a leak in the
property, the valve will close and the Water Valve Control will alarm. See Section 3.2 for reset instructions.
No Flow: If no water is detected flowing through the Flow Meter for the duration of the programmed time, the system will assume
the property is empty and close the valve. Switch the water on again by pressing Water ON on either the Water Valve Control or
Wireless On/Off Switch.
1.2: Turning the water off with a timed delay from the Wireless On/Off Switch
The Wireless Switch incorporates a 1, 2 or 3 hour valve shut off delay function for instances when appliances using water need to
complete their program. Activate the delay timer by pressing either 1h, 2h or 3h. The blue LED indicator on the switch will flash and
beep, the Water Valve Control will beep three times to confirm the wireless signal was received, and the blue LED on the wireless
switch will flash & beep 3 times to indicate that the command has been acknowledged. The valve will close after the chosen delay.
To override a programmed delay, press the Water On switch.
LEAK
SAFE
SOLUTIONS
|
WATERSWITCH
3
USER GUIDE
PAGE 2
Summary of Contents for WaterSwitch3
Page 1: ...WaterSwitch3 User Guide...
