Noisefoc
Manual
First things first
RTFM
Please do yourself and us a favor and read the manual! If you only spend a tenth of the time we invested in
writing, you will be able to operate the device perfectly. In case you are sitting in front of many tiny
components: Please read the instructions for the DIY kit first!
Intended Use / Basic Function
The Noisefoc is designed to operate within a modular synthesizer (Eurorack standard). Noisefoc is an
oscillator for audio frequencies, chaos or weird control voltages.
Safety Instructions
The Noisefoc module is not intended for operation in or under water or at high humidity. Conductive and/or
corrosive liquids, gases, aerosols or vapours may damage or destroy the equipment, regardless of its
operating condition. The same applies to fires or temperatures above 85°C/185°F. The Noisefoc is designed
to operate on a symmetrical DC voltage of +/- 12V, +12V DC or 9V DC battery.
A suitable power supply unit is absolutely necessary for operation, which provides a safe extra-low voltage
that is galvanically isolated from the mains supply.
Avoid mechanical stress, shocks or strong vibrations.
Always use signal sources and/or sinks for the Noisefoc that meet the levels and requirements of the
Eurorack standard. Never connect headphones or consumer hi-fi devices to the module!
Contact / Responsible
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstr. 19
04229 Leipzig / Germany
+49 (0) 341 / 392 965 30
[email protected]
- 2 -
