leaf river IR-3BU, Instruction Manual, Page: 4 / 16

MOTION DETECTOR
controls are located in the
lower half of the inside of
the Game Camera’s door.
They include an LCD panel
which displays settings and
battery status. Any time the
unit is turned on, it will begin
detecting motion and taking
pictures 60 seconds after
the last button is pushed.
MOTION DETECTOR
How do I work this?
4
The large numbers on the LCD panel are the “ Event
Counter ” which displays the number of times the motion
detector triggers, up to 400 events. The Event Counter
continues to work even after the internal memory or the CF
It’s important to let the Game Camera warm up every time
you turn it on. When the backlight on the lower panel goes
off, the Game Camera is ready for operation.
TIP
IMPORTANT! ALWAYS FOLLOW THESE TWO STEPS
WHEN CHANGING THE MOTION DETECTOR SETTINGS :
1. TURN ON MAIN POWER 2. WAIT UNTIL THE BACK-
LIGHT ON THE LOWER DISPLAY GOES OFF
ALWAYS FOLLOW THESE TWO ADDITIONAL STEPS
WHEN CHANGING THE CAMERA SETTINGS :
3. PRESS THE “CAM-POWER” BUTTON
4. WAIT UNTIL THE CAMERA LIGHT GOES OFF
�
4 3 2 1
card is full. To reset the Event Counter to zero,
press and hold the “ OK/Delete ” button for
several seconds until the numbers flash, then
release the button.
When the storage space in the camera is full, the LCD will
blink “ MEMORY FULL ”. If this happens, you should delete
pictures, add a CF card, or change the CF card. The motion
detector will not tell the camera to take any more pictures if
the memory is full.