Note: The default APN of this product is CMNET.
Server connection Setup
Format: #803# domain name or IP address # port number#
This command is used to set GPRS center server address, which could be fixed IP number. After the setup is successful,
the module will send a reply with ‘config ok, the ip server is 59.188.20.67:8545’.
Example: #803#59.188.20.67#8545#
Setup via domain name:
Example: #803#www.gps288.com#8545#
Regular Upload Interval Setup
The defaulted factory upload time interval of this device is 10 seconds for getting the point and uploading one point
location information. The user could change such parameter according to actual demand.
Format: #730# sampling interval #
The value of sampling interval from 10 seconds to 3600 seconds
For example: #730#30#
Note: The parameter “30” indicates getting and uploading one point location information every 30s.
Vehicle Defense Setup
Note: You need to open the vehicle defense first, then you can use the vibration Alarm, or you cannot use vibration
Alarm.
1)
Open vehicle defense
Format: #911#
After sending command successfully, the tracker will return a message “config OK The Auto Alert Is: On”.
2)
Close vehicle defense
Format: #910#
After sending command successfully, the tracker will return a message “config OK The Auto Alert Is: Off”.
