7
3.3 How to Operate this Machine
1. Power Switch
Press the
[POWER]
button of the control panel or the remote control to power up the TV Box.
2. Video Source Selection
Press the
[Video]
button of the control panel or the remote control to select the video sources between
TV, Composite Video, S-Video and PC.
The sequence of the source switch: TV (CATV/AIR)
Æ
Composite Video
Æ
S-Video
Æ
PC
Æ
TV
(CATV/AIR)
3. Channel Scan
Press the
[Scan]
button of the remote control to scan the TV channels.
4. Channel Switch and Volume Control
Press the
[Ch+]
or
[Ch-]
button of the control panel or the
[CH
▲
]
or
[CH
▼
]
button of the remote
control to switch the TV channels up or down.
Press the number keys and the
[Enter]
button of the remote control to select the specific channel.
Press the
[Vol+]
or
[Vol-]
button of the control panel or the
[VOL
f
]
OR
[VOL
e
]
button of the remote
control to adjust the volume.
5. Resolution Selection
Press the
[RES]
button of the remote control to switch between the different resolutions and the
corresponding refresh rates.
The sequence of the resolution switch:
640X480(60Hz)
→
640X480(75Hz)
→
800x600(60Hz)
→
800x600 (75Hz)
→
800x600(85Hz)
→
1024x768(60Hz)
→
1024x768 (75Hz)
→
1024x768 (85Hz)
→
1280x1024(60Hz)
→
640x480(60Hz).
Note: The normal LCD monitors don’t support 85Hz refresh rate. If you switch to 85Hz but cannot get
the video image on your LCD monitor, please press the
[RES]
once again and switch the refresh rate to the range covered
by the monitor. Then, you can get the video image shown on your LCD monitor.
