_______________________________________________________________________________________________
- -
15
Personal computers and auxiliary connected equipment.
Appendix C.
GPS FAQs
Q: My Pocket device asks for a Paring code?
A: All Leadtek Bluetooth devices have a paring code “0000”.
Q: Why does the GPS positioning fail, even though the satellite signal appears to be
normal on my PDA?
A: The reason might be that the GPS has not been used for a while, and the GPS needs to
be reset. You may follow the steps below to reset for positioning with “Cold Start” under
“Navigator” application utility.
1. Tools Port Setting set the “Com Port” and “baud rate” to 4800 click “OK”.
2. Tools Command select “Cold Start” click “OK”.
Q: Why does the position of the car drift around on the map even when my PDA is
properly positioned?
A: This might be caused by unstable satellite signal and weak signal resulted from locating in
heavily blocked areas, which affect the positioning of the car onto the map.
Q: Why there are no sign of signal transmission in my map utility program and
positioning fails even though my GPS is connected?
A: This might be caused by incorrect COM Port setting. Most of the PDA map utility
programs search for GPS device, and the GPS device is not found in this case. It is
suggested that you set the COM Port settings manually instead.