Leadtek GPS 9532, Tehnical Specification

Page: 32 / 48

.
- - 30
15 GPS 9532
Start Navigating
Before you start navigating, make sure the GPS 9532 has been connected to
your computer and the driver and software have been installed.
Open the WinFast Navigator application. Click the t button on the tool
bar of the main screen (see page 10). The WinFast Navigator will start
detecting for protocol and receiving data.
After clicking the button, check the
(see page 12) for data transmission. The indicator blinks red light to
indicate data is being transmitted. If the indicator does not respond for a
period of time, the
dialog box appears automatically. Now
make sure the GPS and driver are installed properly, and change the settings
and receive data manually.
When the connection is established, the window will
start outputting NMEA messages, which tells you the GPS is working properly.
Now look at the
between the and meters
and wait for a fix (green light). When the green light is on, the
received data becomes valid.
Use the dialog box to change the settings of the GPS
9532 when such a change is required.
Step 1.
Connec
Note: Connect Data Transmission
Indicator
Advanced Settings
Step 2.
Development Data View
Fix Indicator Speed Direction
Step 3.
Advanced Settings
(see
page 12)
WinFast Navigator
FOR PC