background image

Thank you for your purchase of Leadtek's Mini Bluetooth GPS 9553 products. This manual 
provides a detailed guidance on Leadtek's GPS products. Please read through the following 
instructions carefully. Be aware that any violation of rules can cause possible danger or offend 
against the law. 

Be aware on appropriate traffic safety
For safety reasons please do not operate the product while driving.

   Switch off the product while boarding the plane

In order to avoid interrupting the on board communication system, please switch off the
product before boarding the plane. Please adhere to the rule accordingly.

Switch off the product whenever it's necessary
Please follow the switch-off instructions strictly.

    Proper use of products 

      Please follow the correct procedure when using the product.

   Accessories 

      Please use the original accessory to avoid damage to the products.

    Proper service and maintenance 

   Connections with other equipments.

      For connections with other 

When starting the car please do not connect the GPS power cable to the lighter on the car 
since strong voltage might cause damage to the products.

      Please note that unauthorized service to the product will forfeit the product warranty. 

equipments please consult the relevant instruction booklet. 

      Avoid connection between incompatible products.

Safety Instructions

3

Summary of Contents for 9553 Series




























Reviews: