3DM580 Digital Stepping Driver Manual V1.1
Tel: +086 400-885-5521
1
Web Site: www.leadshine.com
1. Introduction, Features and Applications
Introduction
The 3DM580 is a versatility fully digital stepping driver based on a DSP with advanced control
algorithm. The 3DM580 is the next generation of digital stepping motor controls. It brings a
unique level of system smoothness, providing optimum torque and nulls mid-range instability.
Motor self-test and parameter auto-setup technology offers optimum responses with different
motors and easy-to-use. The driven motors can run with much smaller noise, lower heating,
smoother movement than most of the drivers in the markets. Its unique features make the 3DM580
an ideal solution for applications that require low-speed smoothness.
Features
Anti-Resonance, provides optimum torque
and nulls mid-range instability
Motor self-test and parameter auto-setup
technology, offers optimum responses with
different motors
Multi-Stepping allows a low resolution step
input to produce a higher microstep output
for smooth system performance
Microstep resolutions programmable, from
200 to 51,200 steps/rev
Supply voltage up to +50 VDC
Output current programmable, from 1.0A to
8.0A
Pulse input frequency up to 500 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
Suitable for 3/6 leads Three-phase motors
Support PUL/DIR and CW/CCW modes
Over-voltage, over-current, short-circuit
protections
Applications
Suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used in
various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling
machines, and so on. Its unique features make the 3DM580 an ideal solution for applications that
require both low-speed smoothness and high speed performances.
