Leader VS370D Instruction Book Download Page 7

Page: 7 / 108

Also, for overedging heavyweight fabrics, the seam width can be increased still more by turning the overedge

seam width adjustment knob. (See page 21)

Three - Thread

Overlock

3.0

Three - Thread

Flatlock

0.5

5.0

7.0

0.5

5.0

7.0

Three - Thread

Wrapped Edge

Overlock

3.0

1.0

7.0

5.0

8.5

Four - Thread Ultra-

Stretch Mock

Safety Stitch

3.0

(504)

(505)

(514)

2. HANDY REFERENCE CHART

The thread tension becomes tighter as the dials are turned to higher numbers. The tension settings shown on

this page as well as throughout the operator’s manual are suggested guides. Adjust thread tensions to suit

the fabric and size of thread used. For best results make tension adjustments in small increments of no

greater than half a number at a time.

Overedge width
Needle used
Needle thread

tension dial

3.5mm
Overedge right needle

Green

5.7mm
Overedge left needle

Blue

4.0

2.0

3.5

1.0

0.5

6.0

0.5

5.0

Summary of Contents for VS370D













































































































Search results

Summary of Contents for VS370D

Reviews:

Related manuals for VS370D

Brands by name

Popular brands

Leader VS370D, Instruction Book

Search results

Summary of Contents for VS370D

Reviews:

Related manuals for VS370D

Brands by name

Popular brands