www.leader-
group.eu • www.leadernorthamerica.com • www.leader-gmbh.de • www.active-photonics.com
- 8 -
2.2 Change of Batteries
The camera's energy design is based on the latest
LiFePO4
(nanophosphate) batteries. These cells are
far superior to the usual NiCd and NiMh batteries with respect to:
-
up to > 5000 charging cycles and extreme performance even in frost
-
No emission of inflammable POTASSIUM HYDRIDE GASES at high temperature
Batteries and battery packs are processed to guarantee correct polarity. Please insert them into the
shaft so that the "
blank
" side (
contact face
) points downwards. Protective class IP67 is only guaranteed
if the compartment is tightly closed.
2.3 Aramid protective cover (option)
The batteries are kept ready to the left and right in the battery
compartments.
The compartments can be easily opened with a coin within
seconds.
Use of the heat resistant aramid protective cover is
recommended to lower the effort of cleaning and extend the
lifetime and operating time of the camera. The camera is
additionally protected against mechanical damage and
chemicals.
Pull the protective cover over the camera and close the
Velcro fasteners. Protective covers wear out with frequent
use and can be ordered as spare parts.
The camera can be charged in the charging bay with or
without the protective cover
Positions of keys are additionally marked in color.
The protective cover doubles the heat resistant time.
