68
12. ETHERNET CONTROL (LV 5838 ONLY)
6.
Type the login name and password.
The login name and password are
“LV5838”. Use uppercase for all characters.
When the login name and password are entered
correctly, “LV5838>“ appears.
7.
Enter TELNET commands.
Enter commands by referring to sections 12.1.2,
“How to Enter Commands,” and
“TELNET Commands.”
To
end a TELNET session, type “bye” in lowercase letters.
12.1.2
How to Enter Commands
The command syntax is explained below. (Some commands do not have parameters.)
To query a current setting, use a question mark as the parameter.
Examples of how to enter commands are shown below.
*
You can enter commands using uppercase or lowercase letters.
*
Commands that begin with
“MODE” only apply to the area (1 or 2) that is specified by the WIN
command.
*
When using TELNET, enable flow control.
If your Telnet client does not support flow control, the LV 5838 may not operate properly when
commands are transferred at a high speed. In such case, allow about 1 second between command
transmissions.
LV5838> LOUD_CLEAR........................... Clear the loudness measurement.
LV5838> MODE:DISPLAY STATUS ......... Set the display mode to status.
LV5838> SYSTEM:TIMECODE ? ............. Query the time code type.
OFF .......................................................... Return value
LV5838>
LV5838> [Command] + [Space] + [Parameter]
LV5838> bye
login: LV5838
Password: ******
LV5838>
USO
RESTRITO