8. CAPTURE FEATURE
83
8. CAPTURE FEATURE
The capture feature consists of screen capture and frame capture.
Frame capture requires the LV 5770SER08 or LV 5770SER09A.
●
Screen Capture
You can use the screen capture feature to capture still-image data of the screen. You can save
the captured data to USB memory or overlay it on the input signal on the LV 7770 display.
●
Frame Capture (LV 5770SER08 and LV 5770SER09A)
You can use the frame capture feature to capture single frames of data from the SDI signal.
You can save the captured data to USB memory or overlay it on the input signal on the LV
7770 display.
Because data is captured as frame data, the data can be displayed on the LV 7770 in different
display modes. The supported display modes are the video signal waveform, vector waveform,
picture, and status (data dump) displays. For details on the data dump display, see the LV
5770SER08/LV 5770SER09A instruction manual.
●
Switching between Screen Capture and Frame Capture
Change the Capture Mode setting on the GENERAL SETUP display.
SYS
→ F•
2 SYSTEM SETUP
→
Figure 8-1 GENERAL SETUP tab
