7. SYSTEM SETTINGS
80
7.3
Displaying System Information
To display the system information, press
F•3
SYSTEM INFO on the system menu. You can use
this screen to view the LV 7770 firmware version and the types of installed optional units.
SYS
→ F•3
SYSTEM INFO →
Figure 7-8 INFORMATION display
7.4
Setting the Shortcut Key
To set the shortcut key, press
F•4
SHORTCUT KEY on the system menu.
The feature that you assign here will be performed when you press SHORTCUT.
See section 4.7.5, “Operating the Shortcut Key.”
Settings
DIRECT:
The previously registered panel settings will be loaded. To register the panel
settings, configure the LV 7770 to the settings that you want to register, press
MEM, and then press SHORTCUT.
VOLUME: The headphone volume will be adjusted.
CAP&WAIT: A screen capture will be taken and saved to a USB memory device.
INTEN:
The waveform intensity will be adjusted.
MENU OFF: The menu is cleared. You can select this when Auto Off under GENERAL SETUP
in the system settings is set to OFF.
