5. BASIC OPERATING PROCEDURES
58
5.2
Selecting the Display Area
The LV 7770 is composed of four screens.
Press a key from 1 to 4 to select the area that you want to operate. When the menu is being
displayed on the multi-screen display, the selected area is displayed with a blue border.
Keys 1 to 4 are assigned as follows:
Figure 5-4 4-screen multi display
Additionally, the display area that is selected when you press a key from 1 to 4 is as follows:
•
4-Screen Multi Display
All areas are displayed at all times.
•
2-Screen Multi Display
If you press 1 or 2, areas 1 and 2 are displayed. If you press 3 or 4, areas 3 and 4 are
displayed.
Figure 5-5 2-screen multi display
•
1-Screen Display
Only the area that you selected by pressing a key from 1 to 4 is displayed.
5.3
Selecting the Input Signal
Depending on the signal that you want to measure, press SDI or CMPST.
On the audio display, regardless of the signal that you select here, the signal that you selected
with INPUT SELECT on the audio menu is measured.
The input signal settings are shared between areas 1 to 4. You cannot configure the settings
differently for each area.
1
2
2
4
3
1
4
3
