Leader LV 5480, Function Menu Explanations

Page: 72 / 246

5. PICTURE DISPLAY
64
5.2.7 Setting User Markers
By setting F•1 SAFE ACTION to USER1 and F•2 SAFE TITLE to USER2, you can display
up to two user-defined markers.
To configure user-defined marker settings, press F•3 USER1/2 SET on the SAFETY ZONE
menu.
PIC → F•2 MARKER → F•5 SAFETY ZONE → F•3 USER1/2 SET →
Figure 5-9 USER1/2 SET menu
To set the width and height of a user marker and turn the aspect ratio display on and off,
follow one of the procedures below.
Press the function dial (F•D) to return the width and height settings to their default value.
The aspect ratio display on/off setting applies both to USER1 and USER2.
Procedure
PIC → F•2 MARKER → F•5 SAFETY ZONE → F•3 USER1/2 SET
→ F•1 USER1 WIDTH[%]: 0 - 90 - 100
→ F•2 USER1 HEIGHT[%]: 0 - 90 - 100
→ F•3 USER2 WIDTH[%]: 0 - 80 - 100
→ F•4 USER2 HEIGHT[%]: 0 - 80 – 100
→ F•5 USER1/2 ASPECT: ON / OFF
5.3 Configuring Line Selection Settings
To configure line selection settings, press F•3 LINE SEL on the PIC menu.
This menu item does not appear when SIZE is set to a value other than FIT.
Reference SIZE → Section 5.8.1, “Selecting the Display Size”
PIC → F•3 LINE SEL →
Figure 5-10 LINE SEL menu