User Manual
Normal Operation
Page 10 of 18
Standby Mode
If the AC voltage is not required continuously, a standby mode can be
activated. In standby mode, the internal consumption is less than 2 W. In
standby mode, the device generates a short pulse every 2 seconds.
If the actual consumption is more than 10 W, the device
switches on.
If the consumer is switched off, the device switches to
standby mode after 1 minute.
The standby mode cannot be activated or deactivated via an
external remote switch.
The standby mode is not suitable for lithium batteries.
Activating the Standby Mode
To activate the standby mode, perform the following steps:
The device is switched off.
1.
Press the on/off button until the blue and red LEDs illuminate.
The standby mode remains active until it is deactivated.
The standby mode is activated.
Deactivating the Standby Mode
To deactivate the standby mode, perform the following steps:
The device is switched off.
1.
Press the on/off button until the blue and red LEDs flash.
The standby mode is deactivated.
