4. Connect the black wire of the input lead (1) to the neg-
ative terminal of the vehicle battery.
ð
The input lead is connected. Now connect the out-
put lead according to its design.
Output lead with open cable ends
To connect the open cable ends of the output lead, proceed as follows:
ü
The input lead is connected.
5. Connect the red wire of the output lead (2) to the positive connection of
your plug.
6. Connect the black wire of the output lead (2) to the negative connection of
your plug.
NOTE!
The green wire is not used.
7. Connect the vehicle battery to the vehicle power circuit.
ð
The operating display (3) is lit green. The battery charger is ready for opera-
tion.
OR
Output lead with DIN 14690 plug
To connect the DIN plug of the output lead, proceed as follows:
ü
The input lead is connected.
8. Connect the DIN plug of the output lead (2) to the your plug connection.
9. Connect the vehicle battery to the vehicle power circuit.
ð
The operating display (3) is lit green. The battery charger is ready for opera-
tion.
OR
Output lead with MagCode plug
To connect the MagCode plug of the output lead, proceed as follows:
ü
The input lead is connected.
10.Connect the MagCode plug of the output lead (2) to your plug connection.
11. Connect the vehicle battery to the vehicle power circuit.
ð
The operating display (3) is lit green. The battery charger is ready for opera-
tion.
9
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
7 Installation
