*** The Flat Cable that connects the Main Controller to the Water
Tank is attached at the factory. This cable is fragile and may tear easily.
The following instructions are how to connect the Flat Cable to avoid
any damage. ***
To connect the cable to the Main Controller unit, follow these in-
structions
A.
Open the back cover on the Main Controller unit and gently ex-
tend the cable lock out to plug in the Flat Cable head. The cable
should have the blue side facing up and be positioned in the cen-
ter.
B.
Push the cable lock in to secure the Flat Cable head.
C.
Replace the back cover.
D.
Open the back cover on the fan enclosure and pull the cable lock
out to plug in the Flat Cable head. The cable should have the blue
side facing up and be positioned in the center.
E.
Push the cable lock in to secure the Flat Cable head and replace
the back cover.
Connection Information
