User Manual
Page 3-8
3.4.1.2 Configuring
Bridge
Following the steps listed below to configure:
1. Click the “New Connection,”PPPoE that will demonstrate default
connection pages.
2.
Choose Bridge in the frame of drawing under the Type, will show that
Bridge connection pages.
3.
Enter the Username, generally the naming rule as “type + PVC”, such
as Bridge_8_35.
4.
Choose encapsulation type: LLC or VC in Bridge setting area in. If
don’t confirm, use the default.
5.
Input VPI/VCI in PVC setting area in.
6.
Choose QoS.
7.
Click “Apply” to finish the connection.