Fluid Use
Please note that the fluid used with the MVS hazer is not like any other fluid used
typically in smoke or hazer machines. It is a high concentration fluid, which other
manufacturers’ machines are unable to process without incurring damage.
Do not attempt to water down the haze fluid … this will lead to inefficient
conversion and produce hot fluid particle emission.
Only Le Maitre Ltd Hazer Fluid should be used. Use of other fluid will cause
incorrect operation and could cause toxicity issues.
Replacing fluid merely requires the changing the empty bottle for a new one. Use
the screw lid to seal the used bottle and dispose of correctly. Re filling the empty
bottle is not advised as this can lead to the introduction of foreign particles which
may reduce the efficiency of the external in-line filter. If it is felt that there is a
reduction in the performance of the machine then this filter should be un-plugged
from the silicon tubing and reversed washed. Never operate the machine with this
filter removed.
Any spillage should be cleaned away. The fluid does not require anything other than
a water based cleanser.
Operating Environment
The device is an electromechanical assembly containing electronic and mechanical
devices. All such devices have reduced life spans under adverse temperature and
humidity conditions.
It is always wise to minimize ‘risky’ operating environments, and provide the
machine with similar conditions as would be applicable to any other electronic
apparatus.
Good conditions include.
Dry – Free from dust etc – stable – non vibrating – non flammable surroundings –
well ventilated – ‘normal temperature’ - non haze re circulation area.
5
