Preparations
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
1. Carefully remove the white plastic protective coat from the chimney covers and range hood
2. Determine and mark the center line on the ceiling where the range hood will be installed. Make sure
there is proper clearance within the ceiling or wall for
the
exhaust vent.
3. Due to the weight and size of this unit, please
,
make sure that the support system or framework
being used is stable and secure in the wall.
4. Put a thick, protective covering over
the
counter top, cook top or range to protect from damage or dirt.
Remove any hazardous objects around the area when installing.
5. Mark the locations of the support mounting bracket holes
and
vent cutout
,
if used
.
Use drill and saber saw or keyhole saw to cut openings for
the
vent (see Venting requirements
)
.
6. Use caulking to seal exterior wall or roof openings.
7.
8.
9.
R
emove the aluminum filter by pressing on the latch
, and
gently pull the alumi
num filter toward the
direction of the dashed arrow as shown in Figure 1.
Remove the grease cup by sliding it sideway , see Figure 2 for location of the grease cup.
Set aside the aluminum filters and grease cup until the range hood is properly installed.
WARNING
Rotating fan can cause
severe injury. Stay clear
of fan when motor is
running.
9
