background image

L E   C A C H E   P R E M I U M   W I N E   C A B I N E T S 

 

 

 

-24- 

VIII.   M A I N T E N A N C E   I N S T R U C T I O N S 

 
 

FURNITURE FINISH

 

The finish on your wine cabinet is protected by two coats of high-grade lacquer.  To prevent 
drying and maintain the finish on your cabinet, use a soft rag and high-quality furniture 
polish periodically to polish the finish of the wine cabinet. 

 
 

DOOR INSTRUCTIONS 

We recommend keeping the doors locked when the cabinet is not in use.  By keeping the 
doors locked, you will ensure that you have a tight seal between the cabinet doors and the 
cabinet itself, and will help prevent the possibility of the door becoming warped over time. 

 
 

COOLING UNIT

 

IT IS IMPORTANT TO CLEAN THE 
CONDENSER COILS 3-4 TIMES A YEAR.  
CLEAN MORE OFTEN IN HI-TRAFFIC OR 
DUSTY AREAS, OR IF YOU HAVE PETS.   
 
If the condenser coils become clogged, the 
cooling unit will not have proper airflow, and 
its performance and longevity will be 
impaired. 

The Condenser Coils can be accessed from 
the top (upright, top-venting wine cabinets) 
or rear (credenzas) of the wine cabinet. The 
diagram at left shows the top of our upright 
wine cabinets, including the location of the 
Fresh Air Intake and the condenser coils.  
 

For best results, use a vacuum or brush to remove 
built up lint and dust on the coils.  If you need to 
lie across the top of the cabinet, the wine cabinet 
will support your weight.   
 
Be careful about using compressed air to clean the 
coils because it may force dirt particles into the 
cooling unit and damage its internal components. 

Summary of Contents for 1400
































Reviews: