On the rear panel, the 2.5 x 5.5 mm jack coaxial DC power connector is on the left.
The three foot
stereo 1/8” input cable connects to the radio attaches on the right. This is a standard stereo cable,
If you wanted to extend the distance away from the radio, a standard headphone extension cable
would work fine. Near the top is the on off switch for the back light.
The brightness control is in the middle and can be adjusted with a small screwdriver. The meter
zero calibration can also be adjusted with a small screwdriver and is near the bottom of the back
panel and will be described in the calibration section.
5
