Page 8
Settings
Lighting
Design
Development
Electronics
LDDE Vertriebsgesellschaft m. b. H.
Simmeringer Hauptstraße 357, 1110 Vienna, Austria
P: +43 1 7671811 0, F: +43 1 7671811 99
E: [email protected]; W: www.ldde.com
LDDE Vertriebsgesellschaft GmbH reserves the right, without prior notice, changes to the product and specification
Test Mode
In this mode, the intensity is continuously scaled up and down from 0-100%, whereby the speed of the dimming
process can be adjusted in 10 steps. The display shows a bar indicating the current speed.
In Test Mode three different test programs are available, see table below.
Use the Up / Down buttons to select the desired mode.
Use the Left / Right buttons to set the dimming speed.
Single
All colors are tested in sequence.
RGB
RGB is tested jointly.
RGBWWCW
All colors are tested simultaneously.
Standalone Mode
In this mode 10 fixed colors are available, which are selected with the Up / Down keys.
Use the Left / Right keys to change the brightness, which is displayed as a bar in the lower line of the display.
R
G
B
WW
CW
Magenta
255
0
255
0
0
Lavender
255
0
255
0
255
CT Blue
0
115
255
0
255
Light Green
0
255
84
118
0
Cyan
0
255
255
0
0
Yellow
255
255
0
0
0
Light Yellow
255
255
0
255
0
Amber
255
166
0
0
0
Warm White
255
216
0
255
255
Cold White
176
255
255
255
255
Control Channel
If the control channel is activated, various functions of the NanoPix Cyc can be switched on and off
via an additional DMX channel.
Control:
1.
Set the Control Channel to the respective value.
2.
No value change for at least 3 seconds.
3.
Then flash directly to 0.
4.
New setting is saved.
PWM frequency 750 Hz
11 - 20 DMX value
PWM frequency 1500 Hz
21 - 30 DMX value
PWM frequency 3000 Hz
31 - 40 DMX value
Quiet Mode ON
101 - 110 DMX value
Quiet Mode OFF
111 - 120 DMX value
Fade to Zero ON
201 - 210 DMX value
Fade to Zero OFF
211 - 220 DMX value