Rev 7/2014 V4.4
| Specifications subject to change without notice.
Seite
6
Installation using mounting bracket
The Nano*Pix 1440 HP / 2880 HP is fitted as standard with two mounting brackets on the back of the housing. These
can be positioned along any point of the profile and offer maximum flexibility.
The mounting brackets come pre-drilled with a 11mm hole to receive a DIN 16 spigot or a stage lighting hook.
Alternatively, floor stands (not included in the delivery) can be mounted on the brackets.
For even more flexibility, we recommend the optional quick release fastener system "Slide" to facilitate frequent changes
from floor-based to overhead operation. See figures 1-3
Figure 1
Figure 2
Figure 3
Secure the Nano*Pix 1440 HP / 2880 HP fixture with a safety cable, using the eyelet provided.