Picture 4.32 The Gennaker Downhaul Line
7) Find the middle of the
gennaker sheet
and double it over to form a loop.
8) Pass this loop through the eyelet at the
clew
of the
gennaker
.
9) Pass the tails of the
gennaker sheet
through the loop and pull it tight (see picture
4.33).
10) With the
gennaker
on the
port
side of the boat, thread one end of the
gennaker
sheet
through the
block
by the
port
-side
shroud
adjuster plate
(see picture 4.34).
11) Take the other end of the
gennaker sheet
, pass it around the
front
of the
jib, and
into the
block
on the other side. Tie the two ends of the
gennaker sheet
together.
Picture 4.33 Tying the Gennaker Sheets
Picture 4.34 The Gennaker Sheet Block
12) Pull the
gennaker
from one side to the other, as if you were
gybing
, to see if
anything is twisted.
13) Finally, pull the
gennaker
down into the
gennaker
chute
.
Summary of Contents for RS FEVA
