LDA ZES-22 S02, User Manual

Page: 10 / 16

5 GPIO Interface E/S configurable through software for signal interface TTL
(0-5V) with the system.
6 Cobranet/ Ethernet
Connectors
Cobranet or Ethernet configurable connectors. The
configuration is done through the selector switch. See
section 9.
7 Mini-USB Connector Mini-Usb Female Connector Type AB.
8 Interface 232/485 Interface 232/485
Description of the pins:
1- Rx-A
2- TX-B
3- GND
9 DIP-switch for Cobranet/
Ethernet selection.
Port X only available in
some models
This configuration is
applicable for Firmware
versions 1.0.4 or higher
and for ETX board v05.
(*)
Description of possible selections:
Table 1: Connection Description
(*) The ETX board version v05 can be identified with the MAC address. These versions
begin with a MAC number different than
00:50:c2: or 70:B3:D5:
2.1.1 ANALOG CONNECTION
The ZES22 accepts and manages the devices of balanced and unbalanced audio.
The following diagrams explain how to connect different types of audio devices.
LDA Audio Tech - Severo Ochoa Nº 31- 29590 MÁLAGA, ESPAÑA. www.lda-audiotech.com 6