Frecuency and atenuation of Supervision Line setup for ONE-500
Support Handbook
1
Introduction.
This manual shows the frequency and attenuation configuration of the line supervision for
the ONE-500 series. The supervision line is ONE's method to measure the impedance and
verify its correct operation.
*Attention:
V
olume controllers can not be used during the line supervision, the impedance varies
according to the set level.
You can find more info in the following link:
https://lda-audiotech.com/2018/11/16/supervision-de-linea-de-altavoces-con-neo-y-one/
2 Changing the Supervision Line frecuency.
In order to change the Supervition Line frecuency setup, please follow the next steps:
1. From the Main menu, hold BCK button 3 sec.
2. Hold together OK+BCK buttons during 3 sec.
3.
Introduce the access ID:
01E12000
4. Introduce the Access Level 3 password (by default
0003
).
5.
Change the supervision frequency from to your convenience between 19 kHz and 24
kHz. By default
19 kHz. (kHz) y 24 (kHz). Por defecto el equipo se encuentra configurado
en 19 kHz.