21
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
The following functions are available in the Environment Scan window (sample depiction of environment scan)
1
6
7
8
9
3
5
2
4
SCAN MENU
1
PORT
Select the port of one of the connected receivers that is to be used for scanning. Note: This receiver cannot
be used for any other function during scanning.
2
START SCAN
Starts the scanning procedure. The receiver defined in the port selection is used to scan the environment.
The receiver RF field strength is displayed directly in the graph. The entire procedure may take several
minutes.
If the scanning procedure cannot be started, then the message "Scan timeout" appears. In this case, make
certain that the proper port (1) is selected and the receiver is correctly connected and working.
3
STOP
Stops the scanning procedure.
4
SAVE PIC
Click here to save the scan results as a graphics file (*.jpg) on your computer.
5
SCAN TABLE
Click here to view the scan results in tabular form and allocate unused frequencies to the connected
receivers. See also the section "Scan Table".
6
SHOW GRID
Toggles the coordinate grid in the display on and off.
USINg THE WIN42 CONTROL CENTER
SOFTWARE
: