IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
9
4
LC DISPLAY
Backlit LC Display. The back light automatically turns off after about 30 seconds if no control buttons are pressed; the back light is turned on when
any of the control buttons is selected. See Chapter “System Setup”.
5
LOW BATT LED
LED lights when the battery charge is low. Please replace the batteries as soon as possible.
6
RF SIGNAL LED
Lights up briefly when you switch on. Lights up when a HF signal is present. Radio frequency of both transmitter and receiver must match.
7
ARROW UP, INCREASE VALUE
See Chapter “System Setup”.
8
ARROW DOWN, DECREASE VALUE
See Chapter “System Setup”.
9
ESC-BUTTON
Press this button to return to the main menu.
10
SET BUTTON
See Chapter “System Setup”.
SYSTEM SETUP
TRANSMITTER PROGRAMMING
1
MAIN MENU
In the main menu the radio frequency, the operating mode (mono/stereo) and signal level (AF L and AF R) are displayed.
1
2
SELECTING A FREQUENCY GROUP
Press the SET button repeatedly until “GROUP SELECT” appears in the display. Press the keys to select the desired frequency
group.
2
3
SELECTING A CHANNEL
Press the SET button repeatedly until “CHANNEL SELECT” appears in the display. Press the keys to select the desired channel.
Note: For simultaneous operation of several systems, please make sure that all the systems use different channels on the same frequency group.