10
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
A
USE AS A FLOOR MONITOR
The speakers can also be used entirely as floor monitors thanks to the monitor DSP preset, the rotatable tweeter, and its all-purpose housing. Non-
slip rubber washers ensure secure positioning. The monitor angle is positioned at 55°.
ROTATE TWEETER BY 90°
The tweeter can be rotated 90° when the speaker needs to be used in situations where it is installed horizontally or used as a floor monitor. Put the
speaker on the slanted monitor panel, remove the front grille from the housing (five screws each for a 2.5 mm Allen key on both the left and right of
the housing), and loosen the four screws holding the tweeter to the housing (see Figure A). Now lift the tweeter slightly and turn it 90°. Make sure
not to damage the tweeter cable. Guide the tweeter cable into the designated holding groove next to the fixing hole and put the tweeter back on
the brackets. Make sure that the cables are not cinched/clamped. Carefully screw the tweeter tight and reattach the front grille to the housing.
