LD LDDSP45K, User Manual, Page: 13 / 136

13
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
•••
X-FIR FILTER (FINITE IMPULSE RESPONSE)
9.9
WINDOW TYPE
- Collapsible menu to select the window type (custom = import a coefficient list)
9.10 FILTER - Selection window for bypass and filter types low pass, high pass or bandpass .
9.11 FREQUENCY - Lower or upper crossover frequency (lower and upper crossover frequency for bandpass). Entry field(s) for input via keyboard.
9.12 - Click on the arrow icon (up arrow) to increase or decrease (down arrow) the gain by 0.1 dB.
9.13
Virtual Fader - Click and hold the Virtual Fader button and move it upwards to increase the gain and downwards to decrease it.
9.14 dB Display / Input Field - Displays the gain in dB and allows direct input via keyboard.
9.15 Polarity - Click this button to invert the polarity of the signal and then set it back to normal polarity (orange button for inverted polarity).
9.16 Mute - Click this button to mute the signal and then unmute it (red button for muted signal).
9.17
Signal Level Display
9.18 Display field for gain reduction (limiter)
9.19 - Click on the arrow icon to increase or reduce the signal delay of the corresponding channel.
9.20
Virtual Fader - Click and hold the Virtual Fader button and move it upwards to increase the signal delay and downwards to decrease it.
9.21
Display / Input Fields - Displays the signal delay in centimeters (cm), inches (inches), and milliseconds (ms), and allows
direct input via keyboard.
9.9
9.10
9.11
OUTPUT GAIN OUTPUT DELAY
9.12
9.13
9.12
9.18
9.17
9.14
9.16
9.15
9.19
9.20
9.19
9.21